HSP-5 Wet Mix Guniting Automatic Concrete Shotcrete Machine
ABOUT US
HSP-5 Wet Mix Guniting Automatic Concrete Shotcrete Machine is mainly used for wetting of concrete, which can make the mixture mix evenly, control the water-cement ratio accurately, which is beneficial to the hydration of cement.So the dust and rebound is small,concrete has good homogeneity and high strengthIt is a kind of construction equipment widely used in underground engineering, geotechnical engineering, municipal engineering and other fields.
-
Underground Explosion-proof
-
Safety And Environmental Protection
| Quantity: | |
|---|---|
Product Description
HSP-5 Wet Mix Guniting Automatic Concrete Shotcrete Machine is mainly used for wetting of concrete, which can make the mixture mix evenly, control the water-cement ratio accurately, which is beneficial to the hydration of cement.So the dust and rebound is small,concrete has good homogeneity and high strengthIt is a kind of construction equipment widely used in underground engineering, geotechnical engineering, municipal engineering and other fields.
HSP-5 Wet Mix Guniting Automatic Concrete Shotcrete Machine are widely be used for Construction Engineering, Mining, Tunnel, Culvert, Hydroelectric Project, Underground Engineering Shotcrete Machine for Construction.
HSP-5 Wet Mix Guniting Automatic Concrete Shotcrete Machine is an advanced and high efficient concrete spraying machine, has been designed especially for spraying of concrete .
Technical characteristics of HSP-5 Wet Mix Guniting Automatic Concrete Shotcrete Machine
(1) Straight-through rotor type non-adhesive material cavity, smooth discharge, high efficiency and time saving.
(2) Four-point elastic compensation compression, good sealing effect, less dust beside the machine, and long life of wearing parts.
(3) Adopt low-pressure high-speed vortex air conveying to overcome the problems of sticking, pipe blocking and pulse separation during material conveying, and the material flow is uniform, continuous and stable.
(4) The new type of nozzle and the discharge elbow device can improve the spraying effect, with less rebound and high spray layer quality.
It has the advantages of low dust , low rebound , high-strength concrete , simple operation, convenient for maintaining , prolong operation life etc. The machine, combined with dosing unite , is suitable for manual spraying or by means of a robotic arm.
Product Parameters
| Model | PZ-3 | PZ-5 | PZ-7 | HSP-5 | HSP-7 | HSP-9 | |
| Output | 3.5m3/h | 5m3/h | 7m3/h | 4.0-5.0m3/h | 5.0-7.0m3/h | 6.0-9.0m3/h | |
| Max. Convey distance | Horizontal | 200m | 200m | 200m | 30-50m | 30-50m | 30-50m |
| Vertical | 20m | 20m | 20m | 20m | 20m | 20m | |
| Water cement ratio | ≤0.4 | ≤0.4 | ≤0.4 | ≤0.4 | ≤0.4 | ≤0.4 | |
| Max. Aggregate. size | Φ20mm | Φ20mm | Φ20mm | Φ15mm | Φ15mm | Φ15mm | |
| Hose inner size | Φ38mm | Φ51mm | Φ64mm | Φ51mm | Φ51/64mm | Φ51/64mm | |
| Operating air pressure | 0.4~0.6MPa | 0.4~0.6MPa | 0.4~0.6MPa | 0.3~0.6MPa | 0.3~0.6MPa | 0.3~0.6MPa | |
| Air consumption | 3-4 m3/min | 7-8 m3/min | 12-15 m3/min | 10-15m3/min | 10-15m3/min | 10-15m3/min | |
| Rotor diameter | 350(150)mm | 438mm | 480mm | 438mm | 480(160)mm | 480(175)mm | |
| Voltage | 380v or as your requirement | 380v or as your requirement | 380v or as your requirement | 380v or as your need | 380v or as your need | 380v or as your need | |
| Overall dimension mm | 1040*550*940 | 1280*700*1280 | 1600*700*1150 | 1280*700*1280 | 2000*800*1300 | 2000*800*1300 | |
| Whole weight | 550kg | 600kg | 900kg | 700kg | 800kg | 900kg | |
