MFC1.0-6 Bucket-tipping Underground Mine Car
ABOUT US
Application: On narrow rail gauge
Service: Transporation in mining, tunneling and related construction.
Fixed mine car is the transportation equipment suitable for ground or underground mining. Transporting the coal , waste rocks and other material along the tunnel or surface industrial site
Load capacity 1 ton, 1.5ton or 3 ton can be available
Service: Transporation in mining, tunneling and related construction.
Fixed mine car is the transportation equipment suitable for ground or underground mining. Transporting the coal , waste rocks and other material along the tunnel or surface industrial site
Load capacity 1 ton, 1.5ton or 3 ton can be available
-
MFC1.0-6
-
China Coal Group
| Quantity: | |
|---|---|
Product Description
Customs can choose the appropriate dump truck based on their actual situation. In addition, our group can also develop different types of mine cars according to customer’s requirements.Bucket-tipping Mine Cars are used in mines or construction sites to transport crushed bulk materials, such as ore, coal, stone, etc. It is composed of a car trunk, a frame, a buffer meet, a wheel axle, etc. Features are simple structure, durable, easy to use, as long as the manual open stop plate can easily unload the material.
Bucket tipping mine car is sturdy and durable, easy to operate and discharge, high in automation, flexible and effortless, without any auxiliary equipment.
The bucket tipping mine car is a common transportation equipment used in coal mines. It is used to transport bulk materials such as coal and ore. Bucket tipping mine car is equipped with an arc-shaped rolling ring at both ends of the steel frame welded by the steel plate, and is supported on the rotating rail of the frame. After manually opening the stop device of the car, a little external force can be used to unload the car to the sides of the car body for unloading. Its unloading angle can reach more than 40°.
1.Car box: It consists of box plate, end cover, angle steel, strip steel and so on. The technical conditions are in compliance with relevant regulations. The flatness of the rear surface of the car support shall not exceed 3‰, and the difference between the two diagonals of the car's mouth shall not exceed 6mm.
2.Frame: It consists of channel steel, bumper seat, shaft card, etc. frame is made of metal and can withstand traction, collision between mine cars and rail impact.
3. Wheel Set: It consists of wheels, shafts, bearings, etc. Before the wheelset is assembled, the iron shoes and blockages should be cleaned and the parts cleaned.
1) High reliability
2) Long service time
3) Low operational costs
4) Made by high quality steel
5)High stress area welds eliminated
6)Mass and section thickness optimized
7)Simplified state of the art mainframe and easy to operate
8)Easy replacement of wear and spare parts
The mine car is used in mines or construction sites to transport broken bulk materials such as ore, coal, stones, etc. It consists of a car, a frame, a buffer bump, an axle, and the like. It is characterized by simple structure, sturdy and durable, easy to use, and it is easy to remove the material as long as the manpower opens the stop plate. Roller bearings are used for the axles, which effectively reduce the running resistance, so they can be pulled or pushed by the locomotive or manpower. The dump bucket type mining car is divided into a large meeting head and a small meeting head. The big meeting head is generally fully anchored, and the small meeting head is generally welded, and must be specially stated when purchasing the customer.
Model | Volume (m³） | Load (T) | Gauge (mm) | Wheel Diameter (mm) | Traction (KN) | Traction Height (mm) | Overall Size (LxWxH) |
MFC0.55-6 | 0.55 | 1.3 | 600 | 300 | 60 | 320 | 1552*850*1150 |
MFC0.75-6 | 0.75 | 1.88 | 600 | 300 | 60 | 320 | 1700*980*1250 |
MFC1.0-6 | 1.0 | 2 | 600 | 300 | 60 | 320 | 1910*1070*130 |
MFC1.2-6 | 1.2 | 3 | 600 | 300 | 60 | 320 | 2228*1070*1320 |
Product Description
The bucket-tipping mine car is composed of a car box, a frame, a flip frame, wheel set etc.
1.Car box: It consists of box plate, end cover, angle steel, strip steel and so on. The technical conditions are in compliance with relevant regulations. The flatness of the rear surface of the car support shall not exceed 3‰, and the difference between the two diagonals of the car's mouth shall not exceed 6mm.
2.Frame: It consists of channel steel, bumper seat, shaft card, etc. frame is made of metal and can withstand traction, collision between mine cars and rail impact.
3. Wheel Set: It consists of wheels, shafts, bearings, etc. Before the wheelset is assembled, the iron shoes and blockages should be cleaned and the parts cleaned.
