MFC1.2-6 Bucket-tipping Mine Car
ABOUT US
Application: On narrow rail gauge
Service: Transporation in mining, tunneling and related construction.
Fixed mine car is the transportation equipment suitable for ground or underground mining. Transporting the coal , waste rocks and other material along the tunnel or surface industrial site
Load capacity 1 ton, 1.5ton or 3 ton can be available
Service: Transporation in mining, tunneling and related construction.
Fixed mine car is the transportation equipment suitable for ground or underground mining. Transporting the coal , waste rocks and other material along the tunnel or surface industrial site
Load capacity 1 ton, 1.5ton or 3 ton can be available
-
MFC1.2-6
-
Chinacoal
| Quantity: | |
|---|---|
Product Description
Bucket-tipping Mine Cars are used in mines or construction sites to transport crushed bulk materials, such as ore, coal, stone, etc. It is composed of a car trunk, a frame, a buffer meet, a wheel axle, etc. Features are simple structure, durable, easy to use, as long as the manual open stop plate can easily unload the material.
The structure of the bucket-tipping mining wagon
1. Car case: It consists of welding the carton plate, end cover and angle steel.
2. Frame: It consists of channel steel, tilting mine type - angle steel, finding head, shaft card and other welding.
3. pair of wheels: consists of wheels, shafts, bearings and so on.
4. Binding screw: It consists of high quality φ400mm carbon knot steel and welding of the hand ring.
continuous production ,mainly used for the excavation of rock roadway and semi coal rock roadway, and for the loading operation in the water diversion tunnel construction, Hot Sale Table Top sale machine Scraper mucking loader with good quality can be realizing the mechanization of coal mine mucking, the driving speed has been greatly improved.
Bucket-tipping Mine Cars are used in mines or construction sites to transport crushed bulk materials, such as ore, coal, stone, etc. It is composed of a car trunk, a frame, a buffer meet, a wheel axle, etc. Features are simple structure, durable, easy to use, as long as the manual open stop plate can easily unload the material.
The bucket-tipping mine car is composed of a car box, a frame, a flip frame, wheel set etc.
1.Car box: It consists of box plate, end cover, angle steel, strip steel and so on. The technical conditions are in compliance with relevant regulations. The flatness of the rear surface of the car support shall not exceed 3‰, and the difference between the two diagonals of the car's mouth shall not exceed 6mm.
2.Frame: It consists of channel steel, bumper seat, shaft card, etc. frame is made of metal and can withstand traction, collision between mine cars and rail impact.
3. Wheel Set: It consists of wheels, shafts, bearings, etc. Before the wheelset is assembled, the iron shoes and blockages should be cleaned and the parts cleaned.
In the mine car machinery disassembly before the preparation of equipment maintenance and training plan and disassembly sequence. Usually after the power is cut off, the external accessories are removed first, then the machine is removed into parts assembly, and finally all parts. In the process of removing parts, the outer part should be removed first, and then the inner part; Remove the upper part first, then the lower part. There is a sequence, if the operation is not correct, there may be some bad situation.
Bucket-tipping mine car is a narrow-gauge railway handling equipment that transports bulk materials such as coal and ore in mines. It is towed by locomotives or winches, and walks on the coal mine floor and the narrow-track railway of the underground roadway to realize the transportation of materials.
Model | Volume (m³） | Load (T) | Gauge (mm) | Wheel Diameter (mm) | Traction (KN) | Traction Height (mm) | Overall Size (LxWxH) |
MFC0.55-6 | 0.55 | 1.3 | 600 | 300 | 60 | 320 | 1552*850*1150 |
MFC0.75-6 | 0.75 | 1.88 | 600 | 300 | 60 | 320 | 1700*980*1250 |
MFC1.0-6 | 1.0 | 2 | 600 | 300 | 60 | 320 | 1910*1070*130 |
MFC1.2-6 | 1.2 | 3 | 600 | 300 | 60 | 320 | 2228*1070*1320 |
Product Description
1.Before using the mine car, carefully check the appearance for serious bump damage, and the wheel should be flexible.
2.When replacing the bearing, the bearing cage opening must be made outward. After the bearing is installed in the wheel, the proper clearance should be maintained and must not be crushed.
3.Seals should use original accessories.
4.Set the repair date according to the applicable location and the size of the match. Timely cleaning and maintenance, timely replacement of the wheel with abnormal sound and no rotation.
5.Operate in strict accordance with the operating procedures, and must not be overloaded. The mine car shall not be manually cleaned during the work.
